⚠ 24/7 Emergency Service · (386) 437-3068
Palmetto Electric Inc. logo
Homeowner guide

Why Are My Lights Flickering? A Palm Coast Electrician Explains

Flickering lights can be a loose bulb or a loose connection behind the wall. Here is how Palm Coast homeowners can tell the difference and when to call.

By Palmetto Electric Inc. · Published October 6, 2026 · Last updated October 6, 2026 · 4 min read

Most flickering comes down to one of three things: the bulb, the fixture or switch, or a loose connection somewhere in your wiring. The first two are usually simple. The third one is the reason we tell people not to ignore it, because a loose connection makes heat, and heat inside a wall is how electrical fires start.

The good news is you can narrow it down yourself in a few minutes before you ever pick up the phone.

Start with the easy stuff

Before you assume the worst, check the cheap and boring causes first.

  • The bulb is loose. Turn the light off, let the bulb cool, and snug it in. This fixes more "electrical problems" than you would think.
  • The bulb and dimmer don't get along. A lot of LED bulbs flicker on older dimmer switches that were built for incandescent bulbs. If the flicker only happens on one dimmed light, try a bulb labeled "dimmable" or a dimmer rated for LEDs.
  • The bulb is just dying. LEDs and CFLs can flicker near the end of their life. Swap in a known good bulb and see if the problem follows the bulb.

If a new bulb fixes it, you are done. Go enjoy your evening.

When it is the fixture or the switch

If one light keeps flickering with a good bulb, the problem is usually in that fixture or the switch that controls it. Wires inside light fixtures and switch boxes can work loose over the years, and outdoor fixtures in our salty, humid air can corrode at the socket.

Signs it's the switch or fixture:

  • It only happens on one light or one switch.
  • Wiggling the switch makes it flicker more.
  • You hear a faint crackle or buzz from the switch.
  • The switch plate feels warm.

A warm switch plate or a buzzing sound is a "turn it off and call" situation. That is heat, and heat means a connection isn't tight.

When the whole house is flickering

If lights flicker in several rooms at once, or dim every time the AC, the dryer or the well pump kicks on, you are looking at something bigger than one bulb.

A small, brief dip when a big motor starts can be normal. What isn't normal:

  • Lights that dim hard or stay dim when an appliance runs.
  • Flickering that comes and goes all over the house with nothing running.
  • Some lights getting brighter while others get dimmer at the same time.

That last one is a big red flag. It can point to a problem with the neutral connection, either in your panel or at the utility side. That can push the wrong voltage to your outlets and fry electronics. If you see it, turn off sensitive electronics and call an electrician right away. If the problem is on the utility side, your power company will need to fix it, and we can help you figure out which side it's on.

Other things that cause flickering

A few more causes we run into around Flagler and Volusia County homes:

  1. An overloaded circuit. Too much plugged into one circuit can cause dimming and tripped breakers.
  2. An aging or crowded panel. Loose breakers or worn bus connections can show up as flickering before anything else.
  3. Storm damage. After lightning or a big storm, flickering can mean a damaged connection at the meter or service line.
  4. Aluminum branch wiring. Some older homes have it, and the connections need special care to stay tight.

What you should not do

Please don't open your panel to "take a look." The main lugs in a panel stay live even with the main breaker off. Don't keep resetting a breaker that keeps tripping either. A breaker that trips again and again is doing its job and telling you something is wrong.

When to call Palmetto Electric

Call us at (386) 437-3068 if:

  • Flickering affects more than one room.
  • A switch, outlet or plate is warm, buzzing or discolored.
  • You smell something hot or burning (if you smell burning, cut power at the breaker if you can do it safely and call right away).
  • Lights brighten and dim in different rooms at the same time.
  • It started after a storm or a power surge.

We are a family-owned, licensed electrical contractor and we have been chasing down flickers in Northeast Florida homes since 1985. Most of the time it's a quick fix. Sometimes it catches a real problem early. Either way, you get to stop wondering.

Frequently asked questions

Is a flickering light dangerous?

A single flickering bulb usually isn't. Flickering in several rooms, a warm or buzzing switch, or a burning smell can mean a loose connection that makes heat, so those need an electrician.

Why do my LED lights flicker on a dimmer?

Many older dimmers were designed for incandescent bulbs. Try a bulb labeled dimmable or a dimmer rated for LED loads. If it still flickers, the switch or wiring may need a look.

Why do my lights dim when the AC turns on?

A quick, small dip when a big motor starts can be normal. Lights that dim a lot or stay dim can point to an overloaded circuit, a loose connection or an undersized service, and are worth having checked.

Got a question about your wiring?

Call the family-owned crew that has been doing this in Northeast Florida since 1985. Honest answers, licensed electricians, no runaround.