The short version: plug outdoor lights into GFCI-protected outdoor outlets, use cords and lights rated for outdoor use, don't chain too many strands together, spread your displays across more than one circuit, and use a timer. If your lights keep tripping the GFCI every time it rains, that's moisture getting into a connection, not the GFCI being fussy.
Florida decorating has its own quirks. We hang lights on palm trees, on lanais and around pools, usually in shorts. Here's how to make the display bright without making it a hazard.
Read the label first
Every light strand and extension cord comes with a rating. Look for:
- Indoor vs. outdoor use. Indoor lights and cords aren't made for rain, sprinklers or sun. Outside, use only products marked for outdoor use.
- A safety certification mark from a recognized testing lab.
- The maximum number of strands you can connect end to end. It's printed on the tag or box. Go past it and the wires in the first strand can overheat.
Older incandescent strands draw a lot more power than LEDs. If you're still using strands from years ago, switching to LED makes overloading a circuit much less likely.
Use GFCI outlets outside
Outdoor outlets should be GFCI protected. That's not optional, it's what keeps a wet cord from becoming a shock hazard. If your outdoor outlet isn't GFCI protected, don't use it for lights until it's fixed.
Keep connections off the ground and out of puddles. Plug junctions can be wrapped in a weatherproof connector cover or kept under an in-use outlet cover. Sprinklers count as rain, so adjust them if they're aimed at your setup.
Don't overload one circuit
This is where most holiday breaker trips come from. Several outlets on the outside of your house might all be on the same circuit, along with the garage, the porch light and the fridge in the garage.
A few ways to keep it under control:
- Spread big displays across outlets on different circuits.
- Swap old incandescent strands for LEDs.
- Don't plug power strips into power strips.
- Use a heavy-duty outdoor cord sized for the load and the distance.
- If a breaker trips, unplug some of the display before you reset it.
If you decorate big every year, it may be worth adding a dedicated outdoor circuit and a weatherproof outlet where you actually need it. That's a permanent fix and a permitted job.
Cords: the usual suspects
- Don't run cords through windows or doors where they can get pinched.
- Don't staple or nail through cords. Use plastic clips made for hanging lights.
- Keep cords out of walkways, or use a cover so nobody trips.
- Throw out any strand or cord with cracked insulation, broken sockets or exposed wire.
Trees, palms and pools
Real trees need water every day, both to look good and to stay less flammable. Keep them away from heaters and outlets.
For palm trees, use lights and cords rated for outdoor use and keep the plug connections off the ground. Around pools and spas, be extra careful. Keep lights and cords well away from the water and only plug into GFCI-protected outlets. If you want permanent lighting near the pool, have a licensed electrician do it, since pool areas have strict wiring rules.
Use timers
A timer means lights aren't running all night or while you're away. Outdoor-rated plug-in timers work fine, and smart plugs or a smart home system can handle it too. Turn everything off before bed and when you leave the house.
When it's time to call an electrician
Call Palmetto Electric at (386) 437-3068 if:
- A GFCI keeps tripping even when it's dry.
- A breaker trips with only a small display plugged in.
- An outlet or plug feels warm or looks scorched.
- You want a permanent outdoor circuit or holiday lighting outlets added.
We've been keeping Northeast Florida homes merry and safe since 1985.
