⚠ 24/7 Emergency Service · (386) 437-3068
Palmetto Electric Inc. logo
Homeowner guide

Signs Your Electrical Panel Needs an Upgrade

Tripping breakers, warm panels and no room for new circuits are common signs your panel is maxed out. A Palm Coast electrician explains what to watch for.

By Palmetto Electric Inc. · Published November 5, 2026 · Last updated November 5, 2026 · 4 min read

Your electrical panel probably needs a closer look if breakers trip often, the panel feels warm or smells hot, there's no room left for new circuits, or you're adding something big like an EV charger, a generator, a pool or an addition. Older panels and certain discontinued brands are also worth having evaluated even if nothing seems wrong. A panel upgrade gives your home the capacity and safety margin modern living needs.

Here's how to tell whether yours is just old or actually holding you back.

What your panel actually does

Your panel (some people call it the breaker box) takes the power coming in from the utility and splits it into the circuits that feed your house. Each breaker protects one circuit from overloading. The panel also has an overall rating, the total amount of power it's built to handle.

A lot of Northeast Florida homes were built when a house had a fraction of the electrical load it has now. Add central AC, a pool pump, a second fridge in the garage, a home office and an EV, and a panel that was fine 30 years ago can get stretched.

Warning signs to take seriously

Some signs mean "plan for it." Some mean "call today."

Call soon:

  • Breakers that trip regularly, especially more than one
  • Lights that dim when big appliances start
  • No open spaces left for new breakers
  • Lots of "tandem" or doubled-up breakers squeezed in to make room
  • Extension cords and power strips running everyday appliances

Call today:

  • The panel cover or breakers feel warm or hot
  • A burning or melting smell near the panel
  • Buzzing or crackling from the panel
  • Scorch marks, melted plastic or rust inside or around the panel
  • Breakers that won't reset, or that never seem to trip at all

Heat, smell and sound are the ones we never want people to wait on.

Panels that deserve a second look

Certain older panel brands and models have a reputation in the trade for breakers that may not trip when they should. If your home has an older or discontinued panel, it's worth having a licensed electrician evaluate it, even if everything seems to work. Home inspectors and insurance companies often flag these too.

Rust is another one we see a lot along the coast. Panels mounted outside or in garages can corrode in our salty, humid air. Corrosion on bus bars and breaker connections is not something to ignore.

Projects that often require more capacity

A panel upgrade often comes up when you're planning something new:

  1. An EV charger. A Level 2 charger needs its own dedicated circuit.
  2. A standby generator. Generator hookups usually involve a transfer switch or interlock at the panel.
  3. A pool, spa or outdoor kitchen.
  4. An addition, garage conversion or in-law suite.
  5. Switching gas appliances to electric.
  6. A big kitchen remodel.

Before any of those, we do a load calculation. That tells us whether your existing panel and service can handle the new load or whether an upgrade makes sense. Sometimes the answer is "you're fine." We'll tell you that too.

Panel upgrade vs. service upgrade

These get used interchangeably, but they're different:

  • Panel replacement: swapping the panel itself for a new one, often with more spaces, at the same service size.
  • Service upgrade: increasing the total power coming into your home. That usually means coordinating with the power company and can include a new meter base and service wiring.

Your load calculation and your plans decide which one you need.

What the process looks like

A typical panel job with us includes an evaluation, a clear scope, a permit through your local building department, the work itself (usually with the power off for part of the day), an inspection and coordination with the utility if the service is changing. We'll walk you through the timeline before we start.

Get it checked

If your panel is showing any of the warning signs above, or you're planning a project that adds load, call Palmetto Electric at (386) 437-3068. We're family-owned, licensed (EC0003177), and we've been upgrading panels across Palm Coast, Flagler, Volusia and St. Johns since 1985.

Frequently asked questions

How do I know if my panel is too small?

Frequent breaker trips, dimming lights when appliances run and no room for new breakers are common clues. An electrician can do a load calculation to know for sure.

Do I need a panel upgrade for an EV charger?

Not always. A Level 2 charger needs a dedicated circuit, and a load calculation shows whether your current panel and service can handle it.

Is a warm electrical panel dangerous?

A panel or breaker that feels warm or hot, smells like burning or buzzes is a warning sign. Call a licensed electrician right away.

Got a question about your wiring?

Call the family-owned crew that has been doing this in Northeast Florida since 1985. Honest answers, licensed electricians, no runaround.