⚠ 24/7 Emergency Service · (386) 437-3068
Palmetto Electric Inc. logo
Safety basics

GFCI Outlets: Where You Need Them and Why They Keep Tripping

GFCI outlets protect you from shock in wet areas. Learn where Florida homes need them, how to test and reset them, and what it means when one keeps tripping.

By Palmetto Electric Inc. · Published October 22, 2026 · Last updated October 22, 2026 · 4 min read

A GFCI (ground fault circuit interrupter) is the outlet with the "Test" and "Reset" buttons, and it exists for one reason: to cut power in a split second if electricity starts flowing somewhere it shouldn't, like through water or through you. Electrical code requires GFCI protection in places where water and electricity can meet, such as bathrooms, kitchens, garages, laundry areas and outdoors. In a Florida home, with pools, lanais, outdoor kitchens and plenty of humidity, they matter even more.

Here's where you should expect to find them, how to check yours, and what it means when one won't stay on.

How a GFCI works

A GFCI constantly compares the power going out on the hot wire with the power coming back on the neutral. If those don't match, even by a tiny amount, it assumes that missing current is leaking somewhere, maybe through a person, and shuts off almost instantly.

A regular breaker protects your wiring from overloads. A GFCI protects people from shock. They do different jobs.

Where GFCI protection is required

The exact rules depend on the code in effect when your home was built or renovated, and they have expanded over the years. In general, current code calls for GFCI protection in places like:

  • Bathrooms
  • Kitchen countertop outlets, and outlets near sinks
  • Garages and accessory buildings
  • Outdoor outlets
  • Laundry areas
  • Crawl spaces and unfinished basements
  • Near pools, hot tubs and other water features
  • Boathouses and docks

Newer editions of the code have added more locations and some appliances, so a home built in the 1990s may not have the protection a new home would. If you're remodeling, adding a circuit or selling, ask us what applies to your project.

One GFCI can protect several outlets

Here's something that confuses a lot of homeowners. You might have a regular-looking outlet in the garage that's dead, and the GFCI that controls it is in a bathroom or outside. One GFCI can protect the outlets "downstream" of it on the same circuit.

If an outlet stops working, before you call anyone, walk the house and press "Reset" on every GFCI you can find. Check bathrooms, the garage, outside walls, the kitchen and the laundry room. It's also possible the protection is in a GFCI breaker in your panel, which will have its own test button.

How to test yours

Test your GFCIs about once a month. It takes seconds.

  1. Plug a small lamp or a phone charger with a light into the outlet.
  2. Press "Test." The power should cut off and the light should go out.
  3. Press "Reset." The power should come back.

If it doesn't cut off when you press Test, or won't reset, the GFCI isn't protecting you and should be replaced. GFCIs do wear out, especially outdoors in salt air.

Why a GFCI keeps tripping

A GFCI that trips now and then after a heavy rain is telling you something. A GFCI that trips constantly is telling you something louder. Common causes:

  • Moisture. Water in an outdoor outlet box or a cover that doesn't seal. A big one around here.
  • A faulty appliance or tool. Older power tools, pool equipment, refrigerators and freezers in the garage can leak a little current.
  • Damaged wiring. Nicked or deteriorated wiring somewhere on the circuit.
  • Too many things on one GFCI. Lots of devices downstream can add up.
  • The GFCI itself is worn out.

Try this: unplug everything from that circuit and reset it. If it holds, plug things back in one at a time until it trips. That points you to the culprit. If it trips with nothing plugged in, the problem is in the wiring or the device, and that's a job for an electrician.

A word about outdoor and pool areas

Outdoor GFCIs here deal with sun, rain, salt and sprinklers. Use "in-use" covers that keep the outlet sealed even with something plugged in, and keep an eye on corrosion. Anything around a pool or spa should be inspected by a licensed electrician, because the rules around pool bonding and wiring are strict for good reason.

Call us if

  • A GFCI won't reset or doesn't trip when you test it.
  • It trips with nothing plugged in.
  • You find scorch marks, a warm outlet or a burning smell.
  • You want GFCI protection added where your home doesn't have it.

Palmetto Electric has served Palm Coast, Flagler, Volusia and St. Johns since 1985. Call (386) 437-3068.

Frequently asked questions

Why does one dead outlet come back when I reset a GFCI in another room?

One GFCI can protect other outlets on the same circuit. The outlet that went dead was downstream of the GFCI that tripped, even if it's in a different room.

How often should I test my GFCI outlets?

About once a month. Press Test to make sure power cuts off, then press Reset. If it doesn't cut off or won't reset, it needs to be replaced.

Is it bad if my GFCI keeps tripping?

Frequent tripping means the GFCI is sensing a problem, often moisture, a faulty appliance or damaged wiring. If it trips with nothing plugged in, call a licensed electrician.

Got a question about your wiring?

Call the family-owned crew that has been doing this in Northeast Florida since 1985. Honest answers, licensed electricians, no runaround.